Types of Diamond Cuts

There are many types of diamond cuts. The Emerald cut is a timeless cut that is beautiful and elegant. It is best for diamonds with high colour and clarity. This cutting style is a step cut, and produces more of a hall of mirror effect than the traditional round cut. It is also a popular choice for engagement rings. In addition, it is much less expensive than a round diamond.

Asscher cut

Asscher cut diamonds are square in shape, not rectangular. They were first used in the early 1920s, and their popularity grew as high jewelry took on a geometric design. The Asscher cut became the darling muse of European jewelers. During its heyday, it was a popular choice for engagement rings.

The Asscher cut is similar to an emerald cut in many ways, except that it is square and has a high crown. An Asscher cut is also characterized by cropped corners, which do not change the diamond’s shape.

Princess cut

Princess cut diamonds display color more than round ones do. However, their softer corners make them susceptible to chipping. Despite this, princess cuts are still eye-clean and do not require perfect color grades. As long as you shop for an item with excellent clarity, you’ll be fine.

The princess cut is among the most popular diamond shapes. It is available from many famous designer brands. If you’re not sure which shape to choose, talk to a Whiteflash consultant. This shape has an exceptional yield compared to other shapes, which means it costs less per carat to produce. That cost savings is passed on to the consumer.

Asprey cut

The Asprey cut is a modern diamond shape that is similar to a cushion cut, but with a slight difference. It features a crown with a letter “A” engraved on it, which gives the stone a delicate, soft look. The Asprey cut was created by diamond cutter Gabi Tolkowsky, who was inspired by the cushion cut diamonds of the 17th and 18th centuries. Only diamonds of D-G color and VS2 clarity are cut with this diamond shape.

The Asprey cut is the most popular of the diamond shapes. It has 61 facets and is available in a range of colors, from D to G. Its clarity can be VS2 or Flawless. An Asprey cut diamond usually costs between 0.50 and three carats. Larger diamonds can also be ordered. This shape is also often referred to as an “eighty-eight” cut due to its resemblance to the sound of the number “eight” in Chinese.


The Asscher diamond cut is a sophisticated diamond design with a distinctive shape. The eight facets around the central point create a three-dimensional structure that resembles an ancient Egyptian pyramid. This cut is not for beginners. A diamond must be of a high clarity grade to be suitable for this cutting style.

The deep pavilion of an Asscher diamond accentuates the color of the diamond. This cut can have inclusions, but these are usually not visible. However, certain engagement ring settings can mask these imperfections.


Pear diamond cuts vary in shape and performance, and the cut quality of a pear shape is more difficult to judge than a round diamond. Pear diamonds should have a depth and table ratio of 56% or greater, and the cut should be symmetrical. The cut is a big factor in a pear diamond’s appearance, and the cut chart below offers some guidelines.

A well-cut pear diamond will hide any imperfections in the stone’s clarity. It will likely be eye-clean, even if it has some black inclusions. However, if you are sensitive to color, you should choose a diamond with a G color grade or higher.


Cushion diamond cuts are one of the most popular shapes of diamonds, especially with brides. This type of cut features large facets to emphasize the color and clarity of the stone. They traditionally have a tall crown and wide facets. The name comes from the Victorian era, when they were first popular. The cut is also famous for reflecting candlelight.


The biggest problem with these diamond cuts is that it is harder to find a diamond with a clean SI2 clarity grade. This can cause buyers to compromise on clarity. It is important to check the clarity grade of the stone before buying it, though, so that any imperfections don’t overpower the brilliance. Also, it’s important to consider the length-to-width ratio of the stone. If the ratio is too large, the stone will be difficult to see.

Leave a Reply

Back to top button